*** AIRLITE FIRMWARE CHANGELOG ***


v1.0 01-06-2015    
----------------
Initial release

v1.1 15-06-2015:
----------------
[-] Bugfix: Phantom power doesn't come up after reboot.
[+] Feature: Testmode for LED's and switches:
		- REBOOT: 	Pressing 6A+8A+6B+8B
		- TEST MODE: 	Pressing 1A+1B while doing a reboot.  

v1.2 24-06-2015:
----------------
[+] Feature: GPO operating types:
		- CONTINEOUS
		- PULSE BY ON
		- PULSE BY OFF
		- PULSE BY ON/OFF
[+] Feature: Phone ringing implemented
		- Send out Phone Ringing event to Airlite Meters.
		   
v1.3 29-06-2015:
----------------
[-] Bugfix: GPO trigger::Phone does not trigger the output.


v1.4 11-11-2015:
----------------
[*] Modification: When a Cue(other than CueAir) becomes active the CueAir is temporary interrupted if active. 
[-] Bugfix: Auto-ON doesn't show the ON-color on startup of the console.


v1.5 20-01-2016:
----------------
[*] Modification: Cue Reset function does not reset the CUE AIR (CUE AIR is manually controlled).

 
v1.6 28-02-2016:
----------------
[-] Bugfix: Virtual Studio Remote functions comm and cough toggle doesn't work.


v1.7 18-03-2016:
----------------
[-] Bugfix: Module 8 doesn't switch from the Aux buss when ON-switch is off.
 

v1.8 02-05-2016:
----------------
[-] Bugfix: Release cough switch when module is off results in turning on the module!


v1.9 25-08-2016:
----------------
[+] Nonstop button restored after power cycle 


v1.10 29-08-2016:
----------------
[+] Cue Air button restored after power cycle 
[+] Auto Cue Announcer button restored after power cycle
[+] Auto Cue CRM button restored after power cycle


v1.11 30-01-2017:
----------------
[-] Bugfix: Remote Cue function: DEACTIVATE does not switch off, ACTIVATE toggles on and off. 


v1.12 03-05-2017:
----------------
[-] Bugfix: Channel 8 doesn't disconnect from prog buss when activating VT mode.  


v1.13 12-06-2017:
----------------
[+] Added 'Auto off' configuration feature: Channel goes OFF (On button de-activated) when fader is moved down.  


v1.14 03-01-2018:
----------------
[-] Bugfix: Program is not disconnected when activating CUE on channel 8. The caller hears PRG + CUE instead of just CUE for communication. 


v1.15 05-01-2018:
----------------
[-] Bugfix: From v1.14 Control LED 1B turned ON directly on startup. Control button 2B reboots the Airlite.  


v1.16 16-01-2018:
----------------
[-] Bugfix: Cue-reset button does not switch channel 8 back to the PRG buss.  


v1.17 23-03-2018:
----------------
[-] Bugfix: Channel 8: Deactivating CUE when in VT-mode activates the routing to PROG buss again.
[-] Bugfix: Channel 8: Switching from VT-mode to normal mode when CUE is active, activates routing to PROG buss again.  


v1.18 11-04-2018:
----------------
[+] Added GPO trigger 'TR_CONNECT'. Pressing [conn] button on ch.8 will trigger the GPO. Can be used to control external hybrid.   


v1.19 06-08-2018:
----------------
[-] Bugfix: pressing CUE Reset caused audioable clicks.   


v1.20 25-03-2019:
----------------
[+] LED of [connect] button toggles between on/off when connected with pc application: "Voip Connect".


v1.21 04-11-2019:
----------------
[+] MIC ON output can be triggered by MIC ON, ON-AIR1, ON-AIR2 in master section of Airlite Configuration Manager.
[+] PGM Auto Off when CUE is active option available in module 8 in Airlite Configuration Manager. 


v1.22 28-04-2021:
----------------
[+] Factory default reset by pressing first A2+B2 and then give sw reset with A6+A8+B6+B8


v1.23.0 11-08-2022:
----------------
[-] Minor bug fixes.
[+] Version number is now following Symantic standard. <major.minor.patch>


v1.23.1 09-01-2023:
-------------------
[+] Switch/LED of [connect] added to `test mode`.